View STW4410_4627882.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IMPORTANT NOTICE
Dear customer, As from August 2nd 2008, the wireless operations of STMicroelectronics have moved to a new company, ST-NXP Wireless. As a result, the following changes are applicable to the attached document.

Company name - STMicroelectronics NV is replaced with ST-NXP Wireless. Copyright - the copyright notice at the bottom of the last page "(c) STMicroelectronics 200x - All rights reserved", shall now read: "(c) ST-NXP Wireless 200x - All rights reserved". Web site - http://www.st.com is replaced with http://www.stnwireless.com Contact information - the list of sales offices is found at http://www.stnwireless.com under Contacts.

If you have any questions related to the document, please contact our nearest sales office. Thank you for your cooperation and understanding. ST-NXP Wireless
www.stnwireless.com
STW4410
2 Step down DC/DC converter/4 LDO/MMC interface power management
Data Brief
Features
2 Step-down converters - Vsdc1: 1 to 1.5 V with 15 steps at 650 mA, and 1.2, 1.3, 1.4 & 1.5 V by ball programming - Vsdc2: 1.8 V at 600 mA for general purpose usage 4 Low-drop output regulators for different uses - Vdig: 1.0, 1.2, 1.5 - 250 mA, supplied by Vsdc2 - Vana1: 1.5, 1.8, 2.5, 2.8 V - 150 mA - Vana2: 1.5, 1.8, 2.5, 2.8 V - 150 mA - Vana3: 1.5, 1.8, 2.5, 2.8 V - 150 mA Mass memory cards (SD/MMC/SDIO) - Vmmc: 1.8, 2.5, 2.85, 3 V - 150mA - Level shifters Miscellaneous - 32 kHz control for processor - Processor supply monitoring - Processor reset control - Serial I2C interface - Thermal shutdown, thermal interruption warning for processor - Clock squarer for master clock
STW4410T/LF TFBGA 84 6x6x1.2mm 0.5mm pitch STW4410/LF VFBGA 84 4.6x4.6x1.0mm 0.4mm pitch
The high level of the dynamic performances allows to use the product to supply all processors used mobile phone or in multimedia platform, furthermore, the output voltage programming of Vsdc1 SMPS converter allows to use this power management unit with all actual processors. The second SMPS has been designed with a fixed voltage of 1.8V that can be used to supply a wild range of external devices as memory devices for instance. The four LDO's can supply all the peripheral devices that can be used on a multimedia platform like audio or TV out devices for example. Vdig is a high current capability LDO and it is supplied by the Vsdc2 SMPS to reduce the power dissipation. This product has also embedded MMC level shifters and the associated LDO to be used to address the MMC card. Soft-start procedure had been embedded in the device managing the internal clock and the start of the different voltage of the DC/DC regulators. OTG programming could be done to change the power supply start timing to let customer the flexibility needed in their applications. STW4410 has got an internal clock that can be used to switch the SMPS without any external clock. The STW4410 typical applications are imaging processor, application processor supply solutions, mobile phones, personal digital assistants (PDA).
Description
STW4410 is a power management device with advanced features. The two Switched Mode Power Supplies (SMPS) and the four Low Drop Output regulators (LDO) had been designed to use the better external components, to have the better efficiency and the better noise rejection to the load and line transient perturbation. This product suits well all mobile applications thanks to its very low consumption in sleep mode.
December 2006
Rev 1
1/3
www.st.com
3
For further information contact your local STMicroelectronics sales office.
Block diagram
STW4410
Block diagram
Figure 1. STW4410 block diagram
Ordering information
Table 1. Order codes
Part number(1) STW4410T/LF STW4410/LF TFBGA84 VFBGA84 Package
1. Specific programming of OTP parameters are possible, for OTP customization, contact your ST local sale representative
Revision history
Table 2.
Date 22-Dec-2006
Document revision history
Revision 1 Initial release. Changes
2/3
STW4410
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
3/3

▲Up To Search▲

Price & Availability of STW4410

	To Download STW4410 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .